Syringe Pump (JMS-II)

Product Description

Functions and Features:

(1)Operation modes: Flow rate controlled infusion mode, volume and time controlled infusion mode.
A) flow rate controlled infusion mode: There are seven flow rate units of available such as ml/h, mg/h, ug/h, mg/kg/h, mg/kg/min, ug/kg/h, ug/kg/min.
B) Volume and Time Controlled Infusion mode: It enables the users to control the infusion by setting the desired volume and the desired time to be infused, it will be the assistance to the traditional manual injection.

(2) Bolus function: Help patients to past the stimulative phase safely and steadily.

(3) KVO function: Automatically start the KVO(keep the vein open) infusion when the normal infusion stopped.

(4) non-volatile memory: The pump memories all the setup parameters and history data of the last infusion.

(5) Alarm and Warns: When something abnormal occurs, the pump can give out alarming and warning information such as AC power failure, battery low, near empty of the syringe, empty of the syringe /occlusion, end of infusion, Syringe disengaged etc.

(6) Available syringe: All kinds of syringe whose standard capacity is in the standard capacity set 10ml, 20ml, 50(60)ml can be used in the pump by custom syringe's setting. And the infusion accuracy can be guaranteed.

SPECIFICATIONS:
Range of Flow rate: 10ml syringe: 0.1~300ml/h;
20ml syringe: 0.1~400ml/h;
50(60)ml syringe: 0.1~600ml/h;
Accuracy: ± 3% (on condition that the total infusion capacity is more than 5.0ml and the infusion rate is more than 2.0ml/h and the syringe extension set have been purged)
Bolus rate: 300ml/h
Display: A large screen (128× 64 pixel), rotary setting with convenient operation interface.

Operating conditions:
Ambient temperature: +5º C~+40º CRelative humidity (RH): 30 %~75 %
Power supply:
AC: 100V~245V, 50 ± 1Hz
Battery: 14.4V battery can use for more than 3 hours after charged for 10 hours.
Atmospheric pressure: 860~1060hPa
Dimension (mm): 336(L)× 153(W)× 132(H)
Weight: 2.5kg